Product Description
Ratios upto 71:1 are in 2 stage helical inline gear motor and above are in 3 stage helical inline gear motor
Despatch period for 2 stage helical inline gear motor is 3-7 days and for 3 stage helical inline gear motor is 14-21 days
Ratios 2, 5, 10, 15, 20, 25, 30, 40, 55, 71 usually are under running production and have greater chance of being delivered early…
DIMENSIONS –TRIPLE REDUCTION BASE MOUNT (Helical Inline Gear Motor)
SIZE | A | B | B1 | C | D | E |
|
G | H | H1 | L | P | P1 | P2 | Q |
|
U | V5 | X | X1 | X2 |
AM0330 | 40 | 32 | 36 | 4 | 6 | 22.5 | 20 k6 |
58 | 110 | 85 | 25 | 135 | 78 | 72 | 110 | 10 | 12 | M6x1.0 16 deep |
147 | 75 | – |
AM0430 | 50 | 40 | 36 | 7 | 8 | 28 | 25 k6 |
75 | 110 | 130 | 35 | 145 | 84 | 75 | 160 | 10 | 16 | M10x1.5 22 deep |
178 | 90 | – |
AM0630 | 60 | 50 | 47 | 7 | 8 | 33 | 30 k6 |
90 | 135 | 165 | 55 | 190 | 105 | 98 | 200 | 15 | 20 | M10x1.5 22 deep |
230 | 115 | – |
AM0730 | 80 | 70 | 60 | 5 | 12 | 43 | 40 k6 |
115 | 170 | 205 | 60 | 230 | 130 | 119 | 245 | 19 | 25 | M16x2.0 36 deep |
275 | 140 | – |
AM0830 | 100 | 80 | 0 | 10 | 14 | 53.5 | 50 k6 |
140 | 215 | 260 | 75 | 290 | 165 | 147 | 310 | 19 | 35 | M16x2.0 36 deep |
321 | 180 | 362 |
AM0930 | 120 | 100 | 0 | 10 | 18 | 64 | 60 m6 |
160 | 250 | 310 | 90 | 340 | 200 | 172 | 365 | 23 | 40 | M20x2.5 42 deep |
394 | 225 | 433 |
AM1030 | 140 | 110 | 0 | 15 | 20 | 74.5 | 70 m6 |
185 | 290 | 370 | 110 | 400 | 225 | 203 | 440 | 27 | 45 | M20x2.5 42 deep |
446 | 250 | 505 |
AM1330 | 170 | 140 | 0 | 15 | 25 | 95 | 90 m6 |
220 | 340 | 410 | 110 | 450 | 242 | 228 | 490 | 34 | 50 | M24x3.0 50 deep |
483 | 265 | 563 |
AM1430 | 210 | 180 | 0 | 15 | 28 | 106 | 100 m6 |
260 | 380 | 500 | 150 | 530 | 278 | 268 | 590 | 41 | 50 | M24x3.0 50 deep |
551 | 300 | 630 |
MOTORS | ALL SIZES | AM0330 | AM0430 | AM0630 | AM0730 | AM0830 | AM0930 | AM1030 | AM1330 | AM1430 | ||||||||||||||
ko | g | g1 | g2 | g6 | k | kb | k | kb | k | kb | k | kb | k | kb | k | kb | k | kb | k | kb | k | kb | ||
MOTOR FRAME SIZE | 63 | 185 | 122 | 101 | 160 | 140 | 437 | 479 | 460 | 502 | 522 | 564 | 608 | 650 | – | – | – | – | – | – | – | – | – | – |
71 | 210 | 137 | 107 | 167 | 160 | 462 | 503 | 489 | 530 | 551 | 592 | 639 | 680 | – | – | – | – | – | – | – | – | – | – | |
80 | 230 | 158 | 118 | 190 | 200 | – | – | 524 | 574 | 586 | 636 | 659 | 709 | 679 | 729 | 779 | 829 | 877 | 927 | – | – | – | – | |
90S/L | 270 | 177 | 149 | 218 | 200 | – | – | – | – | 636 | 695 | 708 | 767 | 729 | 788 | 819 | 878 | 917 | 976 | – | – | – | – | |
100/112 | 340 | 197 | 159 | 238 | 250 | – | – | – | – | – | – | 822 | 890 | 822 | 890 | 895 | 963 | 993 | 1061 | 1118 | 1186 | 1243 | 1311 | |
132 S/M | 402 | 253 | 184 | 288 | 300 | – | – | – | – | – | – | – | – | – | – | 1055 | 1126 | 1180 | 1251 | 1305 | 1376 | |||
160 M/L | 538 | 314 | 230 | * | 350 | – | – | – | – | – | – | – | – | – | – | – | – | 1226 | * | 1310 | * | 1435 | * | |
180 M | 538 | 314 | 230 | * | 350 | – | – | – | – | – | – | – | – | – | – | – | – | 1226 | * | 1310 | * | 1435 | * | |
180 L | 613 | 354 | 257 | * | 350 | – | – | – | – | – | – | – | – | – | – | – | – | 1301 | * | 1385 | * | 1510 | * | |
200 L | 613 | 354 | 257 | * | 400 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1385 | * | 1510 | * | |
225 S/M | 690 | 411 | 280 | * | 450 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1489 | * | 1614 | * |
Dimension kb, k, ko, g, g2, g1 may vary as per make of motor
kb – for brake motors,
g2 – hand release if required
g6 – Dimension is shown for B5 D flange motors,
all parallel keys are to DIN 6885
* Consult AGNEE
** Please check dimension g, g2 and g6 as motor may project below the base of the unit especially when using B5 D flange motors
Good services and work experience in gear motor. I am using their Bevel Helical right angle motor.